On this page> Download Xiaomi Redmi 3S/Redmi 3X [land] Firmware V10.2.1.0.MALMIXM Global Fastboot Stable Marshmallow 6.0 i will proportion to you approximately new firmware document international fastboot worldwide stable miui eleven for xiaomi Redmi 3S/Redmi 3X, this report can use porpose replace your xiaomi rom. The ROM also can use for upgrading, Reinstall and Change EMMC with MIUI Global solid. Several model can’t get replace ota so use this firmware is Solution.
Steps Flashing or Install MIUI V10.2.1.0 Global Stable Fastboot ROM for Redmi 3S/Redmi 3X
Please read before tak action
# This ROM file is only can use for Xiaomi Redmi 3S/Redmi 3X model
# Make sure the battery capacity more than 60% at least, Avoid failure flashing
# Please backup all your data cause after flashing all your data store on internal will be wipe (delleted) permanent can’t restore using any app.
# Use original USB cable for stable flashing process
# Make sure to download and install the USB Drivers and Flash Tool on your computer below.
# this file can use only for Xiaomi with Unlock bootloader [ make testpoint if your device still Locked bootloader ].
Preparation, All material
- Windows PC and Installed Net framework
- USB Driver [already include when you install the Xiaomi flash tool]
- Xiaomi Flash tool
- Firmware can download Below this post
Detail file of Firmware shared :
Size file : 1.7GB
Name file : land_global_images_V10.2.1.0.MALMIXM_20190114.0000.00_6.0_global_d6200458a8.tgz
Version OS : 6.0 Marshmallow
Version MUI : Android Q
Change Logs : fixed bugs (2019-01-25 16:08:36)
Download file: Google Drive ⇒ MUI Server
Simple Guide Step Flashing Xiaomi Redmi 3S/Redmi 3X Using Fastboot ROM
- Extract the Download Firmware flash File
- Open Xiaomi Flashtool
- Turn Off the Device
- Put your Xiaomi Redmi 3S/Redmi 3X to Fastboot mode ==> Press and Hold Volume down key & press power on, or Press the volume down key & then connect with usb to PC , your phone now turn on on fastboot mode
- Connect Your xiaomi phone to PC using USB cable
- On Xiaomi Flashtool click select and browse to Extracted Folder Redmi 3S/Redmi 3X Firmware
- Click refresh and make sure your phone already detected on Xiaomi flashtool
- the bottom left corner select Flash_all
- Click Start [ now flashing run ], wait untill process pass [succes]
How to Flashing Redmi 3S/Redmi 3X without Xiaomi flash tool
- Extract Downloaded firmware file
- Open the folder and make sure now on folder with file flash_all.bat
- Extract the flasherfile.com_Minimal ADB and Fastboot
- put the extracted file same as this picture
- Connect your phone into PC in Fastboot mode
- Now double click flash_all.bat and Flashing will start automatic on Command Prompt mode
for more detail flashing guide please follow this link => How to flash Xiaomi android use XIaomi flash tool Complete with Picture
That’s all I can give to all of you, hopefully it’s useful . . .